 |
Baseplates
Designed by Blue Ox
Safe & Easy
Engineered And Tested On Actual Dinghy For Custom Fit For A Simple System That Works With All Their Towbars and a simple approach to the front arms using only three different ones that are always in stock to keep you on the road
Each Baseplate Includes
Each Baseplate Includes
chassis mounting bracket,
safety cables,
all hardware necessary
front arms
detailed instructions
3 Year Warranty
Made In The USA Craftmanship
 Why should I buy from RV Camp Champ? Looking for a reason? Well, to us, there’s nothing finer than the real, unfiltered reviews by Adventurers like Gary
"I am in awe of Tom and his customer oriented service and expertise. In this day and age I have become accustomed to mediocrity bordering incompetence from most transactions. Tom took an extraordinary amount of time with us and pushed for more information to be sure we got just the right piece of equipment. I also saved about $160 over other competitors." Gary LFor more fine words like Gary , check out our unedited reviews.
 CALL NOW FOR FAST & EASY SERVICE
877-736-2267
Blue Ox Removable Tab or Fixed Tab Series
Base Plate Brackets
Each and every Blue Ox Tow Bar Base Plate is designed specifically to fit the vehicle it was made for. The brackets are designed to limit drilling and eliminate welding to your Dinghy Flat-4-Down Tow Vehicle. This makes for a super easy and safe connection to your RV with the towbar baseplates two-point tabs that connect individually to a BlueOx Tow Bar with telescoping arms. The Tow Bar Base Plate Removable Tabs make the bracket all but disappear with a simple push-in and twist of the tab when not towing. It's like taking off your work clothes for a night out on the town!
STARTING FROM SCRATCH?
TRAVEL SAFE
The Leading Cause of Tow System Failure is Towing Out of Level
Confirm the Hitch Height is Correct
 
High Low Hitch Adapters come in 2,4,6,8 & 10 inches
Also 5,000 - 10,000 lb Towing Capacity
To See
SHOP SAFE AND SECURE
  
Unique State Road Laws That RVers Should KnowHere are five reasons why you need supplemental brakes...1. SafetySupplemental brakes...
• ...take the load off the motorhome so that both
vehicles brake in tandem, taking significantly less
time and distance to come to a controlled stop.
• ...relieve stress on the tow bar and the mount-
ing brackets — a panic stop without supplemental
brakes is a leading cause of tow system failure.
• ...reduce the chance of catastrophic brake failure
at the motorhome, as a result of sustained braking.
2. It’s required
According to the American Automobile Association,
most states, plus many Canadian provinces,
now require supplemental brakes if the towed weight
exceeds 3,000 pounds (see reverse).
3. Chassis warranty
Workhorse/Chevrolet will void your chassis war-
ranty if you tow more than 1,000 pounds without
supplemental brakes; Ford stipulates 1,500 pounds.
4. Wear and tear
Because they aren’t braking for two vehicles, your
motorhome brakes last longer.
5. It just makes good sense
Every other trailer on the road today — a fifth
wheel, travel trailer, boat trailer or a semi-trailer
— has its own braking system. When you’re towing
two or three extra tons, shouldn’t you have a supple-
mental braking system to stop it?
 BX3809 Installation Instructions All Years Volkswagon Superbeetle Read the General Instruction Sheet included with this baseplate. The baseplate mounts to the front underside of the car with the open side of the channel facing up and straddling the anti-roll bar (see illustration). Remove the bolts shown in the illustration. On some models there will be six bolts, while on others there will be eight. Position the baseplate and hand start the new bolts with lock washers to check hole alignment. When all bolts align, tighten securely. The dimensional variations between otherwise identical cars can be considerable. While the location and size of the holes in the baseplate were designed to facilitate easy installation, it may be necessary to file a hole slightly to allow a bolt to clear. Install the tow bar and safety cables according to the instructions included in their packages. Do not substitute other devices if the pin and clip are lost. DEALER OR INSTALLER: BE CERTAIN THE USER RECEIVES THE INSTRUCTION SHEET.
Ref. No. Qty. 1 1 2 2 3 2 4 2 5 2 Tools Required 3/4 Socket 13mm Socket 17mm Socket 61-3530 ........................................................................................ Baseplate, BX3809 201-0418 ............................................................... 8mm-1.25 x 35mm Hex Head Bolt 201-0431 ............................................................... 10mm-1.5 x 85mm Hex Head Bolt 203-0102 ....................................................................................... 8mm Lock Washer 203-0104 ..................................................................................... 10mm Lock Washer       © 1994 Automatic Equipment Mfg. Co. Pender, NE 68047 Automatic Equipment Mfg. Co.
One Mill Road, Industrial Park l Pender, Nebraska 68047 292-1012 12/94 1 of 1
|
|
|