is the only true solution for safe fifth wheel towing with
short bed trucks. SuperGlide automatically moves the trailer
away from the cab while making turns - allowing up to 90°
turning without stopping, slowing down or even thinking
about the space between the truck & trailer - and then
automatically returns the hitch and trailer to the safe
towing position over the truck axle when the turn is
Until the introduction of the SuperGlide with the patented
CamGlide feature, what options were there for people with
short bed trucks? Not turn tight corners while towing
your trailer? Install the hitch improperly... too far
back in the truck bed to distribute the load correctly?
Buy a hitch that can be repositioned but forces you to throw
levers. Set the trailer brakes, pull pins, move forward,
insert pins, and then turn - and the probability that
sometime, somehow either a turn will be made without
remembering to go through that process - or an unintentional
turn will be made during an emergency or a jackknife
situation, and damage to the vehicles or worse will result?
These aren’t really answers and they don’t address your
needs. The SuperGlide isn’t for everyone, but if you want
to tow a fifth wheel trailer with a short bed pickup, the
SuperGlide is the answer!
PullRite SuperGlide is the solution! It allows a fifth wheel hitch to
be installed properly and automatically adjusts the spacing between the
trailer and the pickup cab during turns, without requiring the driver to
do anything other than drive.
SuperGlide models are available with the removable base rail type
installation pioneered by PullRite. Unique SuperGlide mounting system
allows hitch and mounting posts to be easily removed with no tools -
when done towing, simply remove the hitch and rails, twist the heavy
duty mounting posts ¼ turn and lift them out. A smooth, clean truck bed
- with no need to carve chunks out of bed mats & liners.